If you don’t know what an AeroPress is, you should absolutely try out making your own coffee with one of these unique tools. They’ll give you some of the strongest and best quality you could possibly get from a home coffee brewer.
Tools Needed to Get Started
To get started you’re going to need a few tools, namely:
- AeroPress brewer
- AeroPress Filter
- Espresso beans
- Burr grinder
- Coffee scale
- Thermometer
- Coffee tamper
Step 1: Grind Your Beans
The very first thing you need to do is grind down the beans as fine as you can get them. The idea is to get them somewhat powdery, almost like flour, but no finer. If you grind them down finer than this you could find that they gum up the system. If you leave them to coarse you could end up with not enough flavor in your finished product.
Step 2: Prepare Your Brewer
This is where you’re going to prepare your brewer. You want to put a filter in and put some hot water into it. This is actually an important step before you start brewing because it makes sure the filter is a little bit moist and that it’s not going to make everything taste like … well, a filter. You’ll add your grounds into the unit once you’ve done this and put the cap back on the bottom.
Step 3: Tamp it All Down
You can actually dampen a second filter and put it on the end of your tamper before you press down the grounds into the AeroPress. Make sure you’re pressing down firmly and evenly over the top of the grounds. Likewise, make sure you don’t push too much or you could damage the grounds themselves. Instead, press until the tamper doesn’t move anymore as this will tell you that you’ve packed them down firmly. Then remove the tamper by twisting and pulling it upward, but keep the filter on top of the grounds.
Step 4: Prepare Your Water
Here you’re going to get your water heated and ready to go. It should be no lower than 200 degrees Fahrenheit in order to get just the right level of extraction for your grounds. Once you get that far you can pour the water into the AeroPress, be sure you know where the fill line is to get the right level of extraction and the level of strength you want.
Step 5: Start Your AeroPress
Now you’re going to put your mug down and you’ll start pushing the water through the grounds. You’ll need to put a good amount of pressure on it and make sure that you’re pushing firmly all the way across to get the best flavor espresso when you’re finished. You also want to be sure you don’t push too hard or too fast as this could cause a mess.
If you’re looking for a high-quality coffee brewer that will get the job done right and give you an excellent cup of espresso without the electronics then you’re in the right place with this one.
Coffee coffee coffee! Nothing quite like a nice hot cup of joe in the morning 🙂 my name’s Nicole but on here I like to go by Java Jane. I am an avid coffee drinker and writer about all things Java related (and I’m not talking about programming for the millionth time!). Thanks for checking out my blog and always remember to stay grounded!